Skip to content

What it costs to make a custom ring in 2026, line by line

What a custom ring costs to make, line by line: CAD from $80 to $220, then one written price for the gold and labor. A worked example and what moves it.

By the AurumFlow Production Desk · Published November 20, 2026 · 6 min read

A round solitaire engagement ring in yellow gold, photographed from the front and above

Custom rings are hard to price when the work is quoted as a lump, because nobody can see which part moved when the design did. Here is every line, with the figure where we publish one and the rule where it depends on your piece.

What are the lines on the bill for a custom ring?

Line
CAD model
What it covers
The production-ready model, checked for casting, with one round of changes
How it is priced
$80, $140 or $220 by complexity; started on a deposit of $80
Line
Further rounds of changes
What it covers
Each round after the one included
How it is priced
$60 per round
Line
Metal
What it covers
14K or 18K gold, in white, yellow or rose
How it is priced
The exact weight of the model, at the day’s gold
Line
Labor
What it covers
Casting, setting, finishing and polishing
How it is priced
Written into the price of the ring, once the model exists
Line
Stones
What it covers
The center stone and any others
How it is priced
Their own line, chosen with you and priced on its own
Line
Rush
What it covers
A faster date, if you ask for one
How it is priced
+25% of the labor
Line
Inspection report
What it covers
Inspection photos as a signed report
How it is priced
$35
Line
Delivery
What it covers
Tracked and insured, signature on delivery
How it is priced
The carrier’s cost
The lines of a custom ring, in the order they are charged. Figures are from the published rate card and terms; where a line depends on the piece, the table says how it is worked out.

Tax is not included in any of these. The first five lines are what a ring costs to make; the last three are added only when they apply to your order.

How much does the CAD model for a ring cost?

$80, $140 or $220, depending on how much work the ring is, and the same price for a ring, a pendant or a pair of earrings. The metal does not change it. The lead time is 1 to 2 business days for most pieces, up to 5 for complex work.

Complexity
Simple
Rings that fall in it
A plain band or a bezel solitaire
CAD price
$80
Ready in
1 business day
Complexity
Standard
Rings that fall in it
A halo or a pavé band
CAD price
$140
Ready in
2 business days
Complexity
Complex
Rings that fall in it
Micro-pavé, a hidden halo or openwork
CAD price
$220
Ready in
5 business days
Complexity is the only thing on the card that moves the price of the model. Lead time is in business days from the moment modeling starts. Prices and lead times checked against the live rate card on November 20, 2026.

A model starts on a deposit of $80. The rest of its price is built into the first production order for the design, or you pay it when you take the files. If you send your own STL, there is no CAD step and no design fee, and a design from our catalog is already modeled, so it carries no design fee either.

How is the metal priced?

From the model itself. A finished CAD model is a closed shape, so it has a volume, and the volume gives the weight of the ring in the alloy you chose. That weight is priced at the day’s gold.

Two things follow. The same ring in 18K costs more in metal than in 14K, because a gram of 18K carries more gold. And a heavier design costs more: a wider band, a thicker shank or a solid gallery under the stone adds metal, and an open gallery takes it away. The price follows the day’s gold until you approve it. If a quote has expired, it is priced again at that day’s gold before you pay. Once you approve, it is fixed.

What does the labor line cover?

Everything the bench does: casting the ring, setting the stones, finishing and polishing it, then inspecting it against the specification you approved. A casting house in the United States does the bench work, and the piece is ready to ship 5 business days after you approve the price.

The price does not split casting out as a line of its own, so there is no separate casting fee to compare. It is part of one labor figure, written down with the metal and shown to you before anything is made. The labor depends on the piece: a plain band is little more than casting and polishing, while a pavé ring means a seat cut by hand for every stone.

What does a worked example look like?

Take a halo engagement ring drawn from your sketch. A halo is standard complexity, so the model is $140 and ready in 2 business days. You start it on the $80 deposit. You review it, ask for one change, which is included, and then decide you want a second change at $60. Changing the model at this stage costs a round of changes, not a casting.

Step
Start the CAD model
What you pay
$80 deposit
Time
2 business days for the model
Step
Second round of changes
What you pay
$60
Time
During your review
Step
Approve the ring’s written price
What you pay
Gold for the exact weight, plus labor, plus stones. The remaining $60 of the model is part of it
Time
Fixed once you approve
Step
Casting, setting, finishing and inspection
What you pay
Included in the labor line
Time
5 business days
One halo ring, from the sketch to ready to ship. Every figure is from the rate card or the terms. The ring’s own price is written once the model exists.

Added up, the CAD side of this order is $200: the $140 model and one extra round at $60. Add the signed inspection report at $35 and the lines with a published figure come to $235. The ring’s own price comes on top, and that is the one number that depends on the piece. If you approve the model the day it arrives, the ring is ready to ship about 7 business days after you start, before your own review time and the carrier’s.

The pricing page works one of our designs through live, with the gold at today’s price and then the labor. Rush, if you want a faster date, is +25% of the labor, so it moves one line and not the whole price.

What changes the price of a custom ring?

  • Complexity of the design. It sets the CAD price and, through the stones and the hand finishing it implies, the labor.
  • Karat and weight. 18K costs more in metal than 14K, and a heavier design costs more than a lighter one in the same alloy.
  • Stones. The center stone can cost more than everything else in the ring combined, so it is never folded into a headline figure. The number of stones and how they are held also set the setting time.
  • Your own file or a design of ours. A closed STL needs no CAD step. A catalog design is already modeled, so it has no design fee.
  • Rounds of changes. One is included; each further round is $60.
  • Options. Rush and the signed inspection report are added only when you ask; delivery is at the carrier’s cost.

How do you keep the price of a custom ring predictable?

  • Decide the center stone before the model is drawn. The seat is cut to the stone, and a stone changed later is a round of changes.
  • Send the ring size with the brief, in US size or inside circumference in millimeters, so the model is drawn right the first time.
  • Ask for the written price before approving. It is one figure for the finished ring, and it does not move after you approve.

Questions about what a custom ring costs

How much does it cost to make a custom ring?
The model costs $80, $140 or $220 by complexity. The finished ring is then one written price: the metal at the day’s gold for the exact weight of the model, plus the labor for casting, setting and finishing, with the stones as their own line. The total depends on the piece, which is why it is written down before anything is made.
How much does jewelry casting cost?
Casting is part of one labor figure with setting, finishing and inspection, not a separate fee. The labor is written into the ring’s price next to the metal, which is the exact weight of the model at the day’s gold. A plain band is mostly casting and polishing; a pavé ring adds a hand-cut seat for every stone.
Do I pay for CAD if I bring my own file?
No. A file you send as a closed STL skips the CAD step, so there is no design fee. You approve one all-in price for the finished ring, the metal at the day’s gold for the weight plus the labor.
Is the price fixed once I approve it?
Yes. The price follows the day’s gold until you approve it, and an expired quote is priced again at that day’s gold before you pay. Once you approve, it is fixed.
What is not in the price of the ring?
Stones are their own line. Tax is not included, and delivery is the carrier’s cost. Rush (+25% of the labor) and the signed inspection report ($35) are added only if you ask.
How long does a custom ring take?
The model takes 1 to 2 business days for most pieces, up to 5 for complex work. After you approve the price, the ring is ready to ship 5 business days later, inspection included. Your own review and the carrier’s time come on top.
Can I order a single ring?
Yes. There is no minimum, so one ring is a normal order.

To price a ring of your own, send a sketch, a photo or an STL. You get the model and one written price for the finished piece, with every line above shown, before anything is made.

Every file described here is delivered with the model, and yours to keep.