Skip to content

How long does it take to get a custom ring cast from a CAD file?

A ring cast from your own CAD file is ready to ship 5 business days after you approve its price. What the time covers, what starts the clock, and what slows it.

By the AurumFlow Production Desk · Published November 17, 2026 · 3 min read

How long does it take to get a custom ring cast from a CAD file?

Most of the time between a file and a ring is not spent at the bench. It is spent before the bench: on a file that cannot be weighed, on a price that waits for approval, on a ring size that was never sent.

What happens between your file and a finished ring?

Step
Send the file as an STL in millimeters, with the ring size and the metal
Time
Same day
Who
You
Step
The file is weighed, and one all-in price is written for the finished ring
Time
Before the 5 days start
Who
AurumFlow
Step
Approve the price and pay
Time
Same day
Who
You
Step
Casting, setting, finishing and inspection at QC
Time
5 business days
Who
A casting house, then QC
Step
Tracked, insured shipping with a signature on delivery
Time
Carrier’s time
Who
The carrier
A ring cast from your own file, in the order it happens. The CAD step is skipped, because the model already exists.

When does the clock start?

When you approve the ring’s price and pay for it, not when the file arrives. The 5 business days are counted from that approval, which makes it the date to quote a client from. Until you approve, the price follows the day’s gold, and an expired quote is priced again at that day’s gold before you pay. Once you approve, it is fixed.

The price is one figure for the finished ring: the metal at the day’s gold for the weight of the file, plus the labor. Stones are a separate line, and delivery is at the carrier’s rate.

What does the file have to be?

  • An STL, because that is the file a caster works from.
  • In millimeters. An STL carries no units, and a ring exported in the wrong ones arrives as a bracelet or a napkin ring.
  • A closed mesh. A mesh with holes in its surface has no volume, so it cannot be weighed or priced, and our tooling refuses it and says how many open edges it found.

We cast a file as sent, priced from its weight, so tell us if it has been cast successfully before. If it has not, we can redraw it as a CAD order, and every model we draw is checked for casting before it reaches you.

What slows a ring cast from a file?

  • A file that is open, or in the wrong units, which has to be fixed before it can be priced.
  • No ring size, or a size in another system. Send a US size or the inside circumference in millimeters.
  • A center stone that is not decided, because the seat is cut to the stone and the file has to match it.
  • A price approved late. The clock starts at approval, so every day the quote waits is a day added.

Can it be faster?

Rush is +25% of the labor. Ask for it when you order, and ask what date it gives your ring.

How does that compare with other providers?

Casting times are published far less often than prices, and each shop counts them differently. These are the figures two providers state on their own public pages, as a general range and not a like-for-like quote.

Provider
AurumFlow
Casting time as its page states it
5 business days after you approve: casting, setting, finishing and inspection, ready to ship
Provider
White Pine Wholesale
Casting time as its page states it
7–10 days after approval for casting, stone setting and finishing
Provider
Kaprielian Enterprises
Casting time as its page states it
Standard 7–10 business days; rush 3–5 business days (print and cast)
Read from each company’s public page on November 13, 2026. The scopes differ, so this is context and not a quote.

Questions about casting from a CAD file

How long does it take to cast a ring from my CAD file?
5 business days after you approve the ring’s written price and pay, covering casting, setting, finishing and inspection. The ring is then ready to ship; the carrier’s time comes on top.
Do I pay for CAD if I bring my own file?
No. The CAD step is skipped for a file you send, so there is no design fee. You approve one all-in price for the finished ring, the metal at the day’s gold for the weight plus the labor.
Which file do I send?
An STL in millimeters, as a closed mesh. An open mesh has no volume, so it cannot be weighed or priced.
What if my file has not been cast before?
Tell us. We cast a file as sent, and if it has not been cast before we can redraw it as a CAD order, checked for casting before it reaches you.
Can the ring be made faster?
Yes. Rush is +25% of the labor; ask for it when you order and ask what date it gives your piece.

Every file described here is delivered with the model, and yours to keep.