Skip to content

Jewelry CAD and casting services compared in 2026: which way fits whom

Four ways to get custom jewelry CAD and casting done, seven providers side by side with prices and lead times as each publishes them, and how to choose.

By the AurumFlow Production Desk · Published November 13, 2026 · 5 min read

Jewelry CAD and casting services compared in 2026: which way fits whom

A jeweler who wants a custom piece made without a bench of their own has four kinds of provider to choose from, and they are not interchangeable. They differ in who answers for the model, who answers for the metal, whether you need a trade account, and whether the price is written down before work starts. This guide sets out the four, puts seven providers side by side using only what each one publishes on its own pages, and ends with the questions that decide it.

What are the four ways to get CAD and casting done?

  • A freelance CAD marketplace plus a caster of your own, such as CAD Crowd. You brief designers, choose a model, and take the file to a caster you already use. It suits a jeweler with a caster they trust and the time to coordinate the two.
  • A trade CAD and casting shop, such as White Pine Wholesale, Kaprielian or Ross Metals. One shop models, prints and casts, and some of them work with trade accounts. It suits a jeweler who already buys from one of them.
  • A large trade supplier’s CAD/CAM or custom service, such as Stuller or Frederick Goldman’s TruCustom. The custom work sits beside a catalog you may already order from, and is open to account holders. It suits a store that has an account and wants one supplier for stock and custom.
  • A design studio that runs CAD through the finished piece, such as AurumFlow. One party models, prices, has the piece cast and set, and inspects it, with one contact. It suits a jeweler or small brand that wants one written price and one party answering for the result.

How do the providers compare on price, time and access?

Prices for jewelry CAD are published far less often than lead times, and what a published figure covers differs from one provider to the next. “Not published” below means the provider’s own page gives no figure, and nothing here is estimated. AurumFlow’s row is read from the same rate card as the pricing page.

Provider
AurumFlow
Type
Design studio
CAD price
$80, $140 or $220 by complexity
CAD time
1, 2 or 5 business days by complexity
Production
Ready to ship 5 business days after approval
Who orders
Jewelers, stores and brands
Minimum
No minimum order
Provider
Stuller
Type
Large trade supplier
CAD price
Not published
CAD time
Not published
Production
Aims for 10–15 business days on custom orders
Who orders
Full-access resale account
Minimum
No minimums
Provider
White Pine Wholesale
Type
Trade CAD and casting shop
CAD price
$70–$100 on its 2022 list
CAD time
3–4 days
Production
7–10 days after approval
Who orders
Not published
Minimum
Not published
Provider
Kaprielian Enterprises
Type
Trade casting shop
CAD price
Not published
CAD time
Not published
Production
7–10 business days; rush 3–5
Who orders
Labeled “Trade Only”
Minimum
Not published
Provider
Ross Metals
Type
Trade supplier
CAD price
$150 simple, $250 complex
CAD time
5–10 business days
Production
Casting service about 1–3 business days
Who orders
Wholesale account
Minimum
Not published
Provider
Frederick Goldman TruCustom
Type
Large trade supplier
CAD price
Not published
CAD time
48 hours for 3D CAD images (levels 2 and 3)
Production
Within 2 weeks of approval
Who orders
Authorized retailers
Minimum
Not published
Provider
CAD Crowd
Type
Freelance marketplace
CAD price
Not published
CAD time
Not published
Production
Not published
Who orders
Not published
Minimum
Not published
Each figure is as the provider words it on its own page, and “days” are the provider’s days. Scopes differ, so read the row, not just the cell.

AurumFlow’s figures are the rate card’s: CAD at $80, $140 or $220 by complexity, one round of changes included and each further round $60, with a deposit of $80 per piece to start. The piece itself is priced from the model, the metal at the day’s gold for its exact weight plus the labor, in one written price that is fixed once you approve it.

How do you choose between them?

Eight questions settle most of it. Ask them of any provider, including us, and ask for the answers in writing.

  • Who answers for castability? A model that renders well can still fail in the flask. Ask who checks wall thickness, prong seats and where the metal enters, and whether that happens before you see the model. At AurumFlow it does.
  • Is the price fixed and written down before work starts? A quote that may change when the files are opened is an estimate. Ours is one written price for the finished piece, fixed once you approve it.
  • Who owns the files, and in which formats? Ours: once the model is paid in full, the design, the CAD files and the renders are yours, in every format.
  • How many rounds of changes are included, and what is the next one? Ours: one, then $60 each.
  • Is the lead time in writing, and from when is it counted? Ours: the model in 1, 2 or 5 business days by complexity, and the piece ready to ship 5 business days after you approve.
  • Who inspects the finished piece, and against what? Ours: every piece is inspected against the specification you approved, every stone counted and the piece photographed before it ships.
  • What happens with stones? Ours: center stones are sourced inside an order for a piece, or you supply your own. We do not sell loose stones.
  • Is there a minimum, and does it need a trade account? Ours: no minimum, and one piece is a fine order.

What is AurumFlow best suited for, and what is it not?

AurumFlow is best suited to a jeweler, store or small brand that sells custom pieces without a workshop and wants one written price, one contact and one inspection standard from the sketch to the finished piece. It models in CAD, has the piece cast, set, finished and inspected by casting houses in the United States, and has it ready to ship 5 business days after approval.

  • It does not repair or resize finished pieces. It makes new ones.
  • It does not sell loose stones. A stone is part of an order for a piece.
  • It makes 14K and 18K gold, in white, yellow and rose. Other metals are not offered.
  • It produces in the United States only.
  • If you already have a caster you trust and only want the model, you can buy the CAD on its own and take the files there.

Questions about choosing a CAD and casting service

What is the best jewelry CAD service for a small brand?
It depends on what you already have. A brand with a caster it trusts can buy a model alone from a marketplace or a trade shop. A brand that wants one price and one party answering for the model, the casting and the inspection is the case for a design studio such as AurumFlow, with CAD at $80 to $220 and no minimum order.
What does jewelry CAD cost across providers?
As published on their own pages: AurumFlow $80, $140 or $220 by complexity; Ross Metals $150 for a simple model and $250 for a complex one; White Pine Wholesale $70 to $100 on a price list dated 2022. Stuller, Kaprielian, Frederick Goldman and CAD Crowd do not publish a CAD price.
How long does it take to go from CAD to a cast piece?
At AurumFlow the model takes 1, 2 or 5 business days by complexity and the piece is ready to ship 5 business days after you approve. Published elsewhere: White Pine Wholesale 3–4 days for CAD and 7–10 days after approval; Kaprielian 7–10 business days for print and cast; Stuller aims for 10–15 business days on custom orders; Frederick Goldman TruCustom within 2 weeks of approval.
Can I buy CAD alone and cast somewhere else?
Yes. At AurumFlow you can buy the model without production and take the files to a caster of your own once the model is paid in full.
Do I need a trade account to order?
It depends on the provider. Stuller requires a full-access resale account, Frederick Goldman’s TruCustom runs through its retailer login, and Ross Metals shows wholesale prices after login. AurumFlow works with jewelers, stores and brands, with no minimum order.

Every file described here is delivered with the model, and yours to keep.