Jewelry manufacturers for small businesses: what to check
Seven things to settle with a jewelry manufacturer before your first order: minimum, CAD, quality, price, turnaround, file ownership and what happens when a casting fails.
By the AurumFlow Production Desk
Published November 16, 2026 · 5 min read

A small business is not a large one with a smaller order. It cannot absorb a run that comes back wrong, it rarely has a buyer whose job is to chase a supplier, and it often orders one piece or one small batch at a time. That changes which questions matter. The seven below are the ones that decide whether a first order goes well, and each can be asked in a single email.
What is the minimum order, and does it suit a small batch?
Manufacturers set minimums in different ways: by piece count, by order value, per design or per order. A minimum that suits a store reordering one style can rule out a brand testing its first design, so ask which kind it is and whether it changes for a first order. Do not assume that “small batch” in a heading means a small minimum in the contract.
At AurumFlow there is no minimum order. You can start with a single piece and pay per piece. A batch of more than six pieces is priced by a person rather than by the rate card, because a batch is planned as one production run.
Who makes the CAD, and who answers when it cannot be cast?
Custom work starts with a model. Some manufacturers draw it, some take your file, some send it to a third party. The question is who answers when a model that renders well turns out not to cast well, because that fault is found late and is expensive to find.
AurumFlow draws the model and checks it for casting before it reaches you. CAD is priced by complexity: $80 for a simple model in 1 business day, $140 for a standard one in 2 business days, and $220 for a complex one in up to 5 business days. One round of changes is included; each further round is $60. What the check covers is explained in the guide on castability.
Who answers for quality, and against what?
Ask who inspects a finished piece, and against what standard. A manufacturer that lets each workshop grade its own work has a list of suppliers rather than a standard. The useful answer names an inspection, a person who can refuse the piece, and the specification you approved as the thing it is measured against.
At AurumFlow every piece is inspected on six points against the approved specification before it ships, whichever casting house made it: dimensions and weight, casting integrity, stone security, finish, metal and karat stamp, and a final photo sign-off. Every stone is counted and the piece is photographed; you receive the photos and the count.
How is the price set, and when does it stop moving?
A price is only comparable when you know what is inside it. Ask whether it covers metal, labor and finishing, whether stones and shipping are separate lines, and whether the figure is fixed once you approve it or can still follow the gold. A quote that does not say is incomplete.
At AurumFlow the finished piece is one all-in price: the metal at the day’s gold for the model’s weight, plus the labor. It is shown in writing before you approve and fixed once you do. Stones are priced as their own line and delivery is at the carrier’s rate. There are no separate fees for jewelers.
How long does it take, and when does the clock start?
Ask for the lead time in writing and ask what it is counted from. A promise counted from the first conversation slips without anyone having been slow; a promise counted from your approval is one you can plan around.
At AurumFlow most pieces are modeled in 1–2 business days, complex ones in up to 5 business days. The piece is ready to ship 5 business days after you approve. Your review time and the carrier’s time come on top, and rush is available for 25% of the labor.
Who owns the files?
This matters most on the day you want to change manufacturer. Ask whether you receive the editable file or only a mesh, and whether anything stops you taking it elsewhere.
At AurumFlow, once a design is paid in full, the design, the CAD model and the renders are yours, in every format they were delivered in, to take to any caster. The model is delivered as a 3DM and an STL. Our own catalog designs stay ours: you sell the pieces made from them, not the files.
What happens if a casting fails?
Castings can come out with faults, and the useful question is when they are found and who bears the cost. A fault found before the stones are set is a delay; found after, it can mean a remake. Ask for the terms in writing rather than relying on goodwill.
At AurumFlow casting integrity is inspected before setting begins. A piece that fails inspection goes back to the bench and comes through the same gate again; it does not ship with a note. If a piece arrives not matching the specification on your order confirmation, tell us within 14 days of delivery, and we will review it with you and agree how to put it right.
Questions small businesses ask
- What should a small business look for in a jewelry manufacturer?
- A minimum that fits one piece or one small batch, a model checked for casting, one inspection standard, a price fixed in writing before you commit, a lead time counted from your approval, and files you can take with you.
- Does AurumFlow have a minimum order?
- No. You can start with one piece. A batch of more than six pieces is priced by a person, because it is planned as one production run.
- Who makes the jewelry?
- Casting houses in the United States that AurumFlow works with directly and inspects on every job. You deal only with your designer.
Written by the AurumFlow Production Desk
The jeweler’s design studio: CAD, casting and setting, one price.


